Table of Contents
Advertisement
User‐Defined Decoding
Teledyne LeCroy
Figure 3.151: Info Dialog
Then the update is complete.
Figure 3.152: Device Setup Dialog with DONE Device Status
3.22
User-Defined Decoding
User‐defined decoding allows you to create a definition file to interpret commands and
frames that are not in the standard set recognized by the software.
Select Setup > User Defined Decoding to open the User Defined Decoding dialog.
Figure 3.153: SAS: User Defined Decoding
SAS vs. SATA: SAS adds SCSI Commands, SSP Frames, and SMP Frames.
Check ATA Commands and/or STP frames. Click the ellipses next to a command type text
box to display the Open dialog. Choose an appropriate script file and click Open.
Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
339
- Quick Links:
- Hardware Setup
Hide quick links:
Advertisement
Table of Contents
