Unpacking the Analyzer
1.4
Unpacking the Analyzer
Inspect the received shipping container for any damage. Unpack the container and
account for each of the system components listed on the accompanying packing list.
Visually inspect each component for absence of damage. In the event of damage, notify
the shipper and Teledyne LeCroy Corporation. Retain all shipping materials for shipper's
inspection.
1.5
Analyzer Features
The Analyzer has the following features:
Figure 1.2: Front Panel
1.6
LEDs
Each link is supported by LEDs with the following functionality:
GreenThis LED is illuminated during the OOB (Out of Bound) sequence before the link is
established and after link is established it indicates traffic on the bus.
Orange
Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
1 Sierra M6‐2 Getting Started manual
Power Switch (0/1)
Trigger, Error, Link, Speed, and Frame/OOB LEDs (see next page)
Port 1 Initiator/Host SATA connector
Port 1 Target/Device SATA connector
Port 2 Initiator/Host SATA connector
Port 2 Target/Device SATA connector
Status and Configuration LCD Display
External Trigger Input and Output
USB port for host connectivity
Gigabit Ethernet port for network connectivity
Power In (on back)
Expansion In/Out data ports and Clock In/Out connectors (on back)
This LED is illuminated as follows:
Speed
Initiator
1.5G
Off
3.0G
On
Target
Off
Off
Teledyne LeCroy
19