Teledyne LeCroy
Figure 2.32: Launching CrossSync from the SAS/SATA Protocol Suite Application
Please refer to the CrossSync Control Panel User Manual for more information.
2.5.4
Save Workspace
Viewing parameters can be saved in a workspace as a .wss file.
After you open a trace and select views, you can save the viewing parameters in a
workspace file. Select File > Save Workspace to open a Save As dialog. Save the current
workspace as a .wss file.
To set a default workspace viewing parameters, select Setup > Preferences and select
the Trace Viewer tab. In the Default Workspace field, enter the path and name of a saved
workspace .wss file.
The workspace can be switched after opening a trace file. Select File > Open to open
another workspace and select a .wss file.
2.5.5
Saving a Trace Capture
You can save a Trace Capture by selecting Save from the File menu, or select Save As to
save as the trace capture for review at a later time using the following dialog.
56
Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
Start Recording