Fis (Frame Information Structure) (Sata Only) - Teledyne Sierra M6-2 User Manual

Teledyne LeCroy

FIS (Frame Information Structure) (SATA only)

Double‐click FIS to open the FIS Type selection dialog.
Figure 2.86: SATA: FIS Type Dialog
SAS vs. SATA: Not available in SAS.
Choose a FIS Type from the drop‐down list boxand click OK. Repeat for additional types.
Available FIS Types:
Note:
You cannot trigger on a Vendor FIS.
100
Register Host to Device

Register Device to Host

Set Device Bit

DMA Activate

Any Type

DMA Setup

BIST

PIO Setup

Data

Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
Projects