Add Program Lines; Adding Initiator Or Host Emulator Commands; Adding An Ata Command - Teledyne Sierra M6-2 User Manual

Emulation
Figure 2.119: SAS: Host Emulator Program Dialog.
SATA: You can create a Host program using ATA, Frames, and/or Events.
Note:
If the Sierra M6‐4 analyzer is cascaded with a Sierra M124 or M122 analyzer, you cannot
perform a Host Emulator or Initiator Emulator capture.

Add Program Lines

To add program lines, enter the number of lines to add in the Insert field, then click a
command button: ATA, SCSI, TASK, SMP, Frame, or Event.
Note:
SAS Initiator Emulator supports a queue depth of 32 commands.
2.9.2

Adding Initiator or Host Emulator Commands

Adding an ATA Command

Click the Insert ATA Command button, click one of the command categories, and choose
a command (see
Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
Number of Program Lines to add
Insert Frame
Figure 2.120 on page
Add ATA Command
Add SCSI Command
Add Task Command
Add SMP Command
Insert Event
Insert Instruction
Delete Program Line
128).
Teledyne LeCroy
127