Protocol Error Report; Others Report; Ssp Transport Report (Sas) - Teledyne Sierra M6-2 User Manual

Analysis

Protocol Error Report

To display the Protocol Error Report, click the Protocol Error tab. The Protocol Error
Report displays the report data in columns with the following information:
Figure 3.44: SAS: Protocol Error Report

Others Report

To display the Others Report (see
Others Report displays information in the following columns (see the following screen
capture):
Figure 3.45: Others Report

SSP Transport Report (SAS)

To display the SSP Transport Report, click the SSP Transport tab. The SSP Transport Report
displays the report data in columns with the following information (see
page
Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
Protocol Error: All, Custom, Code Violation, CRC Error, Disparity Error, Align‐

Notify Error
Direction: All, H‐>D, D‐>H, I‐>T, T‐>I, or Custom

Count: All, Custom, or a number of occurrences

%: of total count

Items

Idle No: Number of idle packets

Payload Size: Total number of payloads in trace files (SCSI + ATA commands)

Sample Time: Sample time

Idle (Initiator): Host idle time

Idle (Target): Device idle time (total)

SSP Bus Utilization: SSP bus utilization time (SSP frames)

SMP Bus Utilization: SSP bus utilization time (SMP frames)

STP Bus Utilization: SSP bus utilization time (STP frames)

Count or Time

252):
Figure 3.45 on page 251), click the Others tab. The
Teledyne LeCroy
Figure 3.46 on
251