Scenario Actions
Sequence 0
Add an Action
(Adding a
Marker Index)
Figure 4.24: Sequence 0: Event = CRC Error, then Add an Action
In this case, Click on <Click here to add an action> and the Action Properties Menu will
pop up. To add a Jammer Marker, click on Marker and the Properties section of the Menu
will show Marker Index. There are seven Jammer Markers available to the user. See
Figure 4.25 on page
Figure 4.25: Jammer Marker Index 1 – 7
Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
399.
Add an Event
Event = CRC Error
Teledyne LeCroy
399