Teledyne LeCroy
Figure 2.38: Export Paired SAS Address Report Dialog.
You can view expanded traffic (particularly during discovery) in a spreadsheet format. You
can use column headers with SAS Address Pairs. For example, instead of I1, T1, I2, T2, and
so on, the columns are Source/Destination SAS Address pairs, such as S1:SEP or S2:EXP 0.
2.5.8
Trace Properties
Select File > Trace Properties to see the properties of the trace. For more information refer
to
"Trace Properties" on page
2.5.9
Edit Comment
You can write comments and edit them for a trace for future use. Select File > Edit Comment
to view the edit window. Key in the comments and close the window.
62
Check the box Export the whole payload (more than 32KB) to export the whole
payload (more than 32KB).
You can limit the data range of the saved file. You can save:
All Packets
Range between selected cursors
223.
Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
Start Recording