Teledyne Sierra M6-2 User Manual page 416

Teledyne LeCroy
1. Click the New Scenario button in the main library or one of the device libraries. In
2. As in previous examples, create the Global Rules area.
3. Click the prompt to add a sequence. Prompts for the sequence appear beneath the
Figure 4.42: Example 7: Adding a Sequence
By default, the name of the first sequence in a scenario is Sequence 0. The name of the
first state is State 0. To change the name of a sequence or state, or to associate a
description with it, click the name of the sequence or state. A dialog box appears that
allows you to enter that information.
Note:
The description does not appear on screen, but you can bring it up by clicking the name of the
sequence or state.
In the State 0 area, click the prompt to add an event.
414
the Scenario Properties dialog, enter the scenario name, description, and direction
of traffic change.
Global Rules area. You create a sequence one state at a time. The application
numbers states consecutively from 0 up (1, 2, 3, and so on).
Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
Creating a Sequence