Operational Health Checks; Software/Firmware Updates; Remote Updates; Figure 5-1: Report Generation Page - Teledyne T200 User Manual

OPERATIONAL HEALTH CHECKS

Navigate to the Utilities>USB Utilities>Report menu (Figure 5-1) to download a report on
the basic operations of the instrument. To download the report for your own viewing on a
computer or to send to others, insert a flash drive into a front panel USB port and press the
Download button, which is enabled when the instrument detects the flash drive.

Figure 5-1: Report Generation Page

The report can also be set to generate periodically and sent to a Web services "cloud" where
it is available for viewing by Teledyne API technical support personnel. Set this function
with two Vars:
Setup>Vars>Upload Report to Cloud: set to True.
Setup>Vars>Report Upload>Interval: edit the number of hours between report uploads.

SOFTWARE/FIRMWARE UPDATES

There are two ways to check for and acquire updates: either remotely or manually.
R U
EMOTE PDATES
The instrument must be connected to a network that is connected to the Internet. In the
Setup>Instrument menu, select the Remote Update menu and press the Check for Updates
button. If an update is available, it can be downloaded through this page.
083730200A DCN7962 Teledyne API T200 NO/NO /NO Analyzer with NumaView™ Software 109
2 x