Sas Address Report (Sas); Lanes Report (Sas) - Teledyne Sierra M6-2 User Manual

Teledyne LeCroy
Figure 3.51: SAS: TASK Command Report

SAS Address Report (SAS)

To display the SAS Address Report (see
tab.The SAS Address Report displays the report data in columns with the following
information:
Figure 3.52: SAS: SAS Address Report

Lanes Report (SAS)

To display the Lanes Report, click the Lanes tab. The Lanes Report displays the report data
in columns with the following information (see
254
Function

Status

Direction: All, I‐>T, T‐>I, or Custom

Duration: All, Custom, or time unit

Count: All, Custom, or a number

%: of total count

Source SAS Address: All, Custom, or an address

Destination SAS Address: All, Custom, or an address

Protocol Type: SMP, SSP, STP

Frame Type: All, Custom, Command, Data, DMA Activate,

Register Host To Device, Register Device To Host, Response, XFER_RDY
Count: All, Custom, or a number

Port

Open Accept: All, Custom, or a number

Open Reject: All, Custom, or a number

AIP Waiting on Con.

Break

SCSI Command: All, Custom, or a number

ATA Command: All, Custom, or a number

SMP Command: All, Custom, or a number

Out Standing Command: All, Custom, or a number

Transfer Bytes: All, Custom, or a number

Link Utilization (time)

Link Utilization %

Figure 3.52 on page 254), click the SAS Address
Figure 3.53 on page
Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
Analysis
255):