Floating License; External Trig Setting - Teledyne Sierra M6-2 User Manual

Teledyne LeCroy
Important: If any physical link fills its memory bank, the recording process stops. Other
memory banks will typically be less than full (and can be empty). The sample file might be
smaller than the user‐defined Sampling Memory Size. You might even think that the
Analyzer malfunctioned.
3.19

Floating License

Note:
License Manager is only available when in Cascading mode. For example, if one unit is licensed
only for JJ and a second unit is licensed only for AA, cascading the two units and using the
License Manager allows each unit to do JA.
To manage the license, select Setup > Manage Setup Licenses.
The Floating License dialog displays (see
functionality by Function, Total Ports, Assigned To ports, and Not Used. It also displays
the Current License Configuration by License Type, Serial Number, Analyzer,
Device Emulator, Host Emulator, and InFusion.
Figure 3.147: Floating License Dialog
3.20

External Trig Setting

The External Trig Setting dialog displays the External Trig Out Setting and External Trig In
Setting as High Active, Low Active, or Toggle.
336
Figure 3.119 on page 310) the available
Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
Floating License