Teledyne Sierra M6-2 User Manual page 317

Port Status
In addition to displaying OOB, Link, Frame, and Error, a display showing the % buffer full
opens when a trigger occurs.
Figure 3.130: Port Status Window and Capturing Time
1. Pre‐trig capturing (trig is 50%)
2. Trig point (shown by red bar; 36% pre trig was captured)
3. Post‐trig capturing (50% post‐trig was captured and capturing has stopped)
Note:
If sample capture occurs with more than one unit active, additional Port Status windows display.
The OOB, Link, Frame and Error LEDs in the Port Status dialog mimic/follow the LEDs on
the Front panel of the unit.
Reset button
When the LEDs are dim, it indicates they were lit in the past. Pressing the Reset button
erases this history and the illuminated LEDs are removed from the dialog.
Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
LEDs illuminated
Teledyne LeCroy
315