Wait Commands - Teledyne Sierra M6-2 User Manual

Sierra Trainer Generation Commands

5.14.5 Wait Commands

Syntax:
Wait Command Name
WF_TIMEOUT
WF_SOF
WF_EOF
WF_SOAF
WF_EOAF
WF_ACK
WF_NAK_CRC_ERROR
WF_NAK_RESERVED_0
WF_NAK_RESERVED_1
Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
WAIT_FOR { <command1> <command2> ... <group1> <group2> ... }
Description
Timeout Credit Available
When WF_TIMEOUT is requested in
WAIT_FOR command, the wait session
will be released after timeout has
elapsed.
The Timeout value can be set two
different ways:
1. Through the global WaitTimeout
setting that can appear anywhere in
generation. Default value is 1000
microseconds.
Syntax:
Set WaitTimeout = <value> (in
microseconds)
2. Through local WaitTimeout value
for this specific wait session.
Syntax:
WAIT_FOR
(<number_of_microseconds>)
{WF_TIMEOUT
<other_wait_commands>}
In this case wait for other commands
will be released no later then after
number_of_microseconds, but global
WaitTimeout value remains
unchanged for future use.
See Generation\Include\
WaitCommands.inc in the program
folder for the samples of syntax.
primitive
primitive
primitive
primitive
primitive
primitive
primitive
primitive
Teledyne LeCroy
479