Export Read/Write Command Report; Export Paired Sas Address Report - Teledyne Sierra M6-2 User Manual

Start Recording
Note:
The resulting Trainer Generation file cannot exceed 2 MB or 1,000,000 packets.

Export Read/Write Command Report

You can create an Export Read/Write Command Report as an Excel file (*.csv), using the
Export... dialog from the File menu.
In Setup > Preferences > Trace Viewer, you must first select Create statistical report
read/write page in order to create this report.
If this choice was not made when the trace was taken, then use Save As to save the trace
file with this preference. This will append the Read/Write Command Report to the trace
file, so this action need only be done once. When you re‐open the trace file, you should
be able to export the report as described above.
2.5.7

Export Paired SAS Address Report

If Text View is activated, from the File menu you can save a Paired SAS Address Report as
an Excel file, using the Export Paired SAS Address Report dialog.
Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
trace. This may result in the closest match in terms of timing to the original trace,
but may not work with other DUTs.
You can use Auto Alignment (see

You can select the Port (see

Indicate Trainer Generation File Name and click Export to export the trainer

generation file.
"The Global Setting "AutoAlign"" on page
"Setup Menu" on page
Teledyne LeCroy
436).
448).
61