Connecting Via Ethernet; Connecting To A Network - Teledyne Sierra M6-2 User Manual

Teledyne LeCroy
5. Using the extraction tool as a handle, gently wriggle the expansion card forward
6. Repeat steps 4 and 5 approximately three times, until the card is free from the
1.10

Connecting via Ethernet

The Ethernet connection can have any of these configurations:
1. Analyzer connected to a network using a hub or switch, Gigabit Ethernet interface,
2. Analyzer connected to the host machine (machine running the application
3. Analyzer connected directly to the host machine using a SATA cable.
1.11

Connecting to a Network

When connected to a network, the analyzer can communicate with the DHCP server to
obtain IP address configuration information in order to establish a connection. Refer to
"Select Device" on page
36
about 1/8".
retaining screws and you can remove the card from the system.
or similar device.
software), using a hub or switch, Gigabit Ethernet interface, or similar device.
26.
Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
Connecting via Ethernet