Statistical Report - Teledyne Sierra M6-2 User Manual

Teledyne LeCroy
Resp. Time ‐ Response Time
Pld. Bytes ‐ Payload Bytes
Latency Time
Data‐Stat. Time ‐ Data to Status Time
Thrpt MB/s‐ Data Throughput
Duration

3.3.10 Statistical Report

Whenever a captured sample is in the Sample Viewer, a Statistical Report selection in the
Report menu and a Statistical Report Button on the viewer toolbar are enabled. You can
create a Statistical Report for the entire capture or select a portion of it.
To display a Statistical Report, click the
toolbar or select Analysis > Statistical Report to display the Select Statistical Report
Range dialog.
Figure 3.35: Statistical Report Range Dialog
The default statistical report has All Samples. You can set a specific Statistical report range
between defined cursor positions or events.
244
The time taken to transmit this command on the link(s) from the beginning of the
first frame in the command to the end of the last frame in the command.
The number of payload bytes this operation transferred.
The time measured from the transmission of the command to the first data
transmitted for this IO operation.
The time between the end of data transmission for this command and the Status
frame.
The payload divided by response time expressed in MB per second.
The time taken from the first DWord to the last DWord in a line.
Statistical Report button on the viewer
Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
Analysis