Teledyne Sierra M6-2 User Manual page 29

Expandability
Figure 1.11: Connecting to All SAS Devices.
The Select Device dialog allows connecting and disconnecting analyzers on the fly,
without restarting the application.
The new Device List (introduced in version 4.10) mandates using updated firmware in
order to detect the analyzer over Ethernet. Thus, the analyzer must be updated over USB
before it can be used remotely over Ethernet. This is applicable for any update from
version 4.00 or earlier to any version from 4.10 or later.
The following Select Device dialog displays (see
'Location' column mean the following:
Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
Red: Firmware and/or BusEngine components need to be updated to the latest

version
Light Blue: The device is ready to be connected.

Yellow: The device is locked.

Green: The software is connected and ready to run.

Figure 1.12 on page 28). The colors in the
Teledyne LeCroy
27