Filter Descending Packets From Trace Highlight Bar; Selectable Filter Options For Sas - Teledyne Sierra M6-2 User Manual

Navigation + View Toolbar
Figure 3.100: Second Level of Multilevel Filtering
.
Figure 3.101: Third Level of Multilevel Filtering

Filter descending packets from trace highlight bar

If you check the Filter descend packets if ascend packet is filtered checkbox, the
application will only filter onward from the highlighted trace selection bar.
If you uncheck this option, the software only filters the filtered packet. For example, if this
option is checked and any SCSI command is selected, all transport and link packets of this
command are filtered. If you unchecked this option, only selected SCSI commands are
filtered.
3.8.4

Selectable Filter Options for SAS

The SAS Filter Options are:
Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
Command Data Pattern

Bus Condition

Primitive

Incomplete Frames

Address Frames

SSP Frames

SMP Frames

Teledyne LeCroy
291