Power On - Teledyne Sierra M6-2 User Manual

Emulation
Figure 2.129: SATA: Event Dropdown List
The following menu options are available for SATA events:

Power On

The Power Sources command supports 1.2, 1.5, 3.3, 5.0 and 12 Volts electricity voltage.
Click the ... button to display the Power Sources dialog (see
Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
Self Test Exit

PM Request

PM Response

Wake Up

Soft Reset

OOB Signal

Primitive

Attach

Detach

Power On (see "Power On" on page

Power Off

PHY Setting & Change Speed

Change Data Frame Size Setting

DevSlp‐ Toggles pin 3 of the power segment of the of the SATA connector to high

setting.
Exit DevSlp‐ Toggles pin 3 of the power segment of the of the SATA connector to

low setting.
135)
Figure 2.130 on page
Teledyne LeCroy
136.
135