Trace Viewer Tab; Open Trace File In; Optimization - Teledyne Sierra M6-2 User Manual

Teledyne LeCroy

3.18.2 Trace Viewer Tab

Figure 3.142: Preferences Dialog Trace Viewer Tab
The SATA Preferences dialog has the same options.

Open Trace file In

Default Workspace: The software opens a
default workspace.
As previously saved: The software opens a
saved configuration for the

Optimization

Sampling memory usage optimization: Enables memory cascading for two ports. The
analyzer will use memory of another port if there is not data on another port. (see
"Sampling Memory Usage Optimization" on page
Quick View: Quick View allows full access to the whole trace more quickly, especially
when using a Gigabit Ethernet connection. However, the trace is NOT written to the host
machine's hard drive. To save the trace, you must manually click Save.
If you do not check Quick View, the trace loads more slowly but is automatically saved to
the host machine's hard drive.
328
trace
file in view(s) based on the specified
trace
file in view (views) based on the last
trace
file.
Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
334)
Preferences