Generation Rules Toolbar - Teledyne Sierra M6-2 User Manual

Generation Options

Generation Rules Toolbar

The Generation Rules toolbar buttons control the Generation Rules page.
Figure 5.17: Generation Rules Toolbar
Note:
If you have a wheel on the mouse, you can zoom by holding down the CTRL key and rolling the
mouse wheel.
Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
TABLE 5.13: Recording Rules Buttons
New Event. Creates a new
event in the Available
Events area.
Delete Event. Deletes the
selected event.
Undo. Undoes the change
made to Recording Rules
page. The Undo buffer has
unlimited size.
Redo. Restores changes
done to the Recording
Rules page.
Zoom In. Enlarges the
display (see note). There
are five zoom levels. The
default level is the middle
one.
Teledyne LeCroy
Zoom Out. Makes the
display appear smaller.
Show/Hide Channels.
Shows or hides the
channel icon on the Event
button.
Show/Hide Properties
Dialog. Shows or hides the
properties dialog of the
selected event, action, or
state.
This display appears when
the current Recording
Rules configuration can be
executed by the hardware.
This display appears when
the current Recording
Rules configuration cannot
be executed by the
hardware.
499