Choose A Parameter; Exclude Patterns - Teledyne Sierra M6-2 User Manual

Projects
Figure 2.42: SAS: Choosing Capture Patterns
SAS vs. SATA: SATA Dialog replaces "Exclude SATA_CONT" with "Exclude CONT" and
"Exclude SATA_SYNC" with "Exclude SYNC".
SAS: The SAS Parameters window displays the following pattern capture categories:
SATA: The SATA Parameters window displays the following pattern capture categories:
2.6.5

Choose a Parameter

To choose a parameter for capture from any of these categories, highlight the category in
the parameter window and click the Add>> button. This opens selection dialogs for each
of the categories displaying all of the parameters for that category. All patterns added
appear in the Project Tree.
2.6.6

Exclude Patterns

Check this box to allow for the capture of everything except the patterns that have been
added to the Project Tree.
Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
STP Frame

Address Frame

SMP Frame

SSP Frame

Data Pattern

Protocol Errors

FIS

FIS Pattern

Data Pattern

Protocol Errors

Teledyne LeCroy
67