Teledyne Sierra M6-2 User Manual page 181

Performance Analysis
Figure 2.193: SAS/SATA: Performance Analysis Definition Dialog
Note:
When you use the Exerciser, channel 2 is not usable and is greyed out.
Choose Protocol
(SAS only)
Check the protocol check box(es) to select the protocol category:
(SAS only)
Check the protocol check box to select the protocol category:
Analyzer Port
Check the Analyzer Port(s) to include in the performance calculation.
Link
Check the Link(s) to include in the performance calculation.
STP Port
Enter the STP port number for the STP port to include in the performance calculation.
SAS Source Address (SAS only)
Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
SSP for SCSI Commands

STP for SATA Commands

SMP for Management Commands

Address Frame for Open and Identify

STP

Teledyne LeCroy
179