Select Device - Teledyne Sierra M6-2 User Manual

Teledyne LeCroy
Figure 1.9: Cascading Wrongly
5. Make a note of the last four digits of the MAC address of the unit designated as
Figure 1.10: Address Digits
IMPORTANT!
1.9.2

Select Device

After starting the software, click on Configuration and select All Connected Devices (see
the following screen capture).
26
Unit 1 and the last four digits of the other units, in order of connection.
Power up all units before starting the software.
Incorrect way to connect:
The black color pin of the
ribbon wire is connected
in a different way between
the 2 connectors.
Cascading works incorrectly
in this case, the boxes are
connected but no traces
are captured.
Black color pin
of ribbon wire
Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
Expandability