Waveform Display - Teledyne Sierra M6-2 User Manual

Teledyne LeCroy
Field View:
This view shows, when applicable, a hierarchical display of the selected Packet, with the
relevant fields in each level.
To open a Frame Inspector View of the current capture, select View > Frame Inspector
View or click the
Figure 3.30: Frame Inspector View
3.3.9

Waveform Display

You can enable a waveform display for all active ports, and perform timing
measurements, by positioning timing cursors within the waveform display (see
Figure 3.31 on page
Select View > Wave Form View or click the
View Type toolbar to enable the waveform display.
The Compact View shows the OOB Sequence with speed negotiation.
Figure 3.31: SAS: Waveform View
242
button on the View Type toolbar.
242).
Show/Hide Waveform button on the
Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
Analysis