Copying Packets From A Trace To A Host Emulator Script - Teledyne Sierra M6-2 User Manual

Analysis Teledyne LeCroy

Copying Packets from a Trace to a Host Emulator Script

This check mark in the illustration below shows packet (s) selected to copy. You can copy
packet(s) from a trace and paste it into a host emulator script. That is why you can only
mark packets that we support in emulator and host side packets. You can also mark
multiple packets by left‐clicking and moving the mouse over multiple packets and then
right‐click to select them, and paste them in an emulator script.
Figure 3.11: Packets Selected to Copy.
Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual 231