Teledyne Sierra M6-2 User Manual page 215

Target and Device Emulation
Delay Between Getting HOLD to Sending HOLDA
To enable the Delay between getting HOLD to Sending HOLDA feature perform the
following steps:
1. Enter the value in the Delay between getting HOLD to Sending HOLDA field in the
2. Select the Error Injection tab.
Figure 2.225: SATA: Error Injection Tab
3. Click the Generate periodic error check box.
4. Click the Generate Error on outgoing frame commands check box.
5. Click the Settings button.
Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
Settings tab as shown in the figure above.
The Outgoing FRAME Error Setting dialog displays.
Teledyne LeCroy
213