Viewing Check Condition Sense Data - Teledyne Sierra M6-2 User Manual

Analysis

Viewing Check Condition Sense Data

When a Check Condition error occurs, you can view decode data from it. This info is
shown in Packet View. Under Transport layer, expand Info Unit, then expand Sense Data.
In Column View, check the "show Field View in Column View" check box in SW settings,
then display Field View while column View is open.
Figure 3.14: Check Condition Data.
1. Open Packet View.
Figure 3.15: Packet view.
2. Show Transport layer.
Figure 3.16: Transport layer.
Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
Teledyne LeCroy
233