Adding An Smp Command (Sas Only) - Teledyne Sierra M6-2 User Manual

Teledyne LeCroy

Adding an SMP Command (SAS only)

Click the Insert SMP Command button and choose the command to insert.
Figure 2.125: SAS: SMP Dropdown List
The following menu options are available:
132
Report General

Report Manufacturer Information

Read GPIO Register

Report self‐configuration status

Report zone permission table

Report zone manager password

Report broadcast

Discover

Report Phy Error Log

Report Phy SATA

Report Route Information

Report phy event

Discover list

Report phy event list

Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
Emulation