Teledyne Sierra M6-2 User Manual page 356

Teledyne LeCroy
Figure 3.170: SATA: Compliance Test Selection
2. Choose the tests in the left pane of the dialog and click the Add>> button.
3. Enter a value for Capture Timeout.
Note:
If test running time exceeds the Capture Timeout value, the test terminates.
4. Enter the Device Name.
5. Select the UTD Version as UTD 1.3 (for devices supporting up to SATA 2.6
354
The Digital Test Group has:
General Device Requirements: GTR‐01 through GTR‐05

Native Command Queuing: NCQ‐01 through NCQ‐05

Asynchronous Signal Recovery: ASR‐01 and ASR‐02

Software Settings Preservation: SSP‐01 through SSP‐12

Interface Power Management: IPM‐01 through IPM‐11

Digital Optional Features: DOF‐01 and DOF‐02

The PHY Test Group has tests OOB‐03 through OOB‐07.
specification) or UTD 1.4 (for devices supporting up to SATA 3.0 specification).
Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
Compliance Test (SATA)