Projects
Bus Condition
Double‐click Bus Condition in the Pattern window to open the Bus Conditions dialog.
Port ID
Figure 2.70: SAS: Bus Conditions Dialog
SAS vs. SATA: SATA Dialog separates the COMINIT and COMRESET check boxes and
replaces COMWAKE with Host COMWAKE and COMSAS with Device COMWAKE.
Check Conditions on which to trigger, then click OK.
Note:
You can define triggering for specific ports by checking or unchecking Port IDs.
Symbol
Double‐click Symbol in the Pattern window to open the Symbol dialog.
Figure 2.71: Symbol Dialog
Choose a symbol type by checking either the K Symbol or D Symbol option, then click the
down arrow in the Symbol dropdown list, choose a symbol to trigger on, and click OK.
Note that the D Symbol choice does not have a down arrow.
Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
Teledyne LeCroy
87