Device Libraries; Scenario Properties - Teledyne Sierra M6-2 User Manual

Teledyne LeCroy
Figure 4.13: Test Cases for SATA Library
4.5.3

Device Libraries

In addition to general libraries, the application defines device libraries. Each device
library is associated with a specific InFusion device. Each device library opens in a
separate Device Library window and holds up to ten InFusion scenarios for the device.
When you connect to the device and click the entry for that device in the Device List, the
device library for the device opens automatically.
The scenarios that appear in the device library are those currently stored on the
corresponding device. They were uploaded from the device to your host machine when
you opened the device library. You can click any of the scenarios listed to open it for
editing. When you are finished with your edits, you can use the buttons on the
Device Library toolbar to download the revised scenario to the device.
The None scenario is an empty and undefined scenario to allow you to assign port(s) to
None.
The Multiport feature allows you to run a scenario by more than one port in a
Device Library and to assign different ports to different scenarios and run them together.
Each scenario in a library can run by more than one port.
4.6

Scenario Properties

To begin the scenario creation process, you click the New Scenario button in a library
window or on the InFusion application toolbar. As the first step in creating a scenario, the
application prompts you for scenario name, a short description (optional), and the
direction of traffic to which any traffic changes apply. Changes are, for example, injection
or removal of data or a primitive.
You identify direction of traffic change, or modification, in terms of traffic origin. The
application uses the following conventions:
382
From Initiator: Change is made to traffic coming from test host (for example,

Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
Scenario Properties