Port Configuration And Projects - Teledyne Sierra M6-2 User Manual

Teledyne LeCroy
Sierra M6‐2 can have Analyzer and Trainer or Analyzer and Jammer on same port.
Note:
To display the current Port Configuration, click the green button in the lower right corner to
display the Port Status window (see

Port Configuration and Projects

Port Configuration depends on Project selected.
Performance Analyzer and Performance Analyzer with Initiator Emulator do not use
ports.
Protocol Analyzer, Protocol Analyzer with Initiator Emulator, and Target Emulator can
have the following port configurations.
Analyzers work with Emulators, Jammer, and Trainer (see below).
One Initiator Emulator can work by itself or work with one Analyzer.
One Target Emulator can work by itself or work with one Analyzer.
(Note that Host Emulator and Analyzer can be on one port and
Analyzer and Device Emulator can be on another port at the same time.)
Emulators do not work with Trainer.
Emulators work with Jammer (see below).
114
To activate the Initiator Emulator on a port and run the Analyzer on the same

port, select
To activate the InFusion on a port, select

To activate the Trainer on a port, select

Project Number
One analyzer
and/or
one emulator
Protocol Analyzer Port 1.
Protocol Analyzer Port 1.
with Initiator
Emulator
Pair on Port 1.
Target Emulator Port 1.
Pair on Port 1
InitiatorEmulator/Analyzer.
"Port Status" on page
Two analyzers
and/or
two emulators
One analyzer each on
1 and 2.
One analyzer each on
Port 1 and Port 2.
One emulator each on
Port 1 and Port 2.
One emulator each on
Port 1 and Port 2.
Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
Jammer.
Trainer.
314).
Projects