Writable Buffer Size Field; Error Injection Tab - Teledyne Sierra M6-2 User Manual

Target and Device Emulation
TABLE 2.1:
Word
76
77
78
79
82
83
84
86
87
100‐103
106
117‐118
215‐216
255

Writable Buffer Size Field

The writable buffer size field is about 3.5 GB. The buffer is cyclical in that it behaves in a
Circular Writable manner in the Host Emulator. Writing 500MB at address 00000000 and
1GB starting at address 00100000 still stores the contents of address 00000000. If you
start writing 2GB at address 3G, the contents of address 00000000 are overwritten after
1G.
After writing data to the Device Emulator and disconnecting/reconnecting by clicking
Start/Stop the data still remains in the Device Emulator.

Error Injection Tab

Clicking the Error Injection tab opens the General Errors dialog (see
page 188
SAS: In addition to specifying general errors, you can also set errors for Identify,
Connection Management, and SAS Commands by clicking the corresponding icon in the
Errors window.
The error injection tab enables general errors or commands errors to be introduced at a
fixed time after the device emulator has been activated.
Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
Bit Numbers of Settable Bits
14, 9, 8, 3, 2 and 1
7
8, 5, 4, 3, 2 and 1
7, 5, 4, 3, 2 and 1
0
10, 1, 0
7, 6, 1, 0
10, 1, 0
7, 6, 1, 0
All
12
All
All
All
and see Figure 2.201 on page 188).
Teledyne LeCroy
Figure 2.200 on
187