Set Time Stamp Origin; Filtering - Teledyne Sierra M6-2 User Manual

Navigation + View Toolbar

Set Time Stamp Origin

Right‐click in the sample viewer to open the fly out menu:
Figure 3.97: Bookmark Found Example in Data Viewer Display
Highlight Set Time Stamp Origin and choose either Absolute, Trigger, Current Position, or
Based on system time.
3.8.2

Filtering

The Filtering menu and options allow you to modify data in the sample viewer display to
exclude packets with a set of user‐defined patterns and show the results in all views.
To set up filtering, you must have a viewer display open.
The Filtering menu has the options:
Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
Enable Filtering (see

Filtering (see "Filter Setup" on page

Link Layer (SAS)

Transport Layer (SAS)

Application Layer (SAS)

Physical Layer (SATA)

FIS Layer (SATA)

Command Layer (SATA)

Filter Idles (see "Filter Idle" on page

"Enable Filter" on page
288)
297)
Teledyne LeCroy
297)
287