Teledyne Sierra M6-2 User Manual page 155

Emulation
Insert Primitive
Check Insert Primitive and then click the Type button to open the Primitive Type dialog
and select the primitive type.
Figure 2.161: Primitive Type Dialog
Click the down arrow on the Primitive combo box, choose a primitive, then click OK.
Fill reserved fields with
Enter a value for which reserved fields to change, if other than 0.
Field of Frame
Select Destroy, scroll through the available choices in the Field of Frame list box, and
choose a field to destroy. Alternatively, select Specify Value to fill the chosen field with a
pre‐defined value.
Insert Frame
Check Insert Frame, click the down arrow on the Type combo box, and choose the frame
type.Then choose to insert it before or after an outgoing frame command. Make sure that
you have clicked More.
Note:
In addition to the pre‐defined frame types, you can scroll down the list to User Defined and
enter your own frame data between SOF and EOF.
Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
Teledyne LeCroy
153