Teledyne Sierra M6-2 User Manual page 151

Emulation
Click the down arrow on the External Trigger out combo box to choose the external
trigger level: High, Low, or No change on command execution.
Retry
Enter a value for the number of command retries when a command failed in the Retry
text box.
Store Payload in Buffer
Check the Store Payload in Buffer check box and enter values for Data Offset and Data
Length.
Auto Update LBA
Check the Auto Update LBA check box and check an auto update option button.
Send Hard Reset
Check the radio button and enter the delay after command restarts to send the Hard
Reset.
LBA Overlay - Overwrites first Dword of:
Check the LBA Overlay ‐ Overwrites first Dword of check box. Select one of the two
options:
Random Error Injection
Random Error Injection specifies the probability of Error Injection on the command. The
probability percentage that you select applies to all Error Injection items.
Close Connection Setting
Checking Close Connection Setting enables the Error Settings button. Click this button to
display the Close Connection Setting dialog.
Figure 2.157: Close Connection Dialog
Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
Each sector with: Overwrites first Dword of each sector with given value

First sector with: Overwrites first Dword of first sector with given value band

increments for next sector(s)
Teledyne LeCroy
149