Show/Hide Ports; Single Port; Multiple Ports; Packet View Toolbar - Teledyne Sierra M6-2 User Manual

Packet View Toolbar

3.8.9

Show/Hide Ports

You can Show/Hide a Single Port or you can Show/Hide Multiple Ports. To do so click on
the Ch Down Arrow.

Single Port

If Single Port is selected, you can click on one port button at a time to show/hide the
capture for that port. Show/Hide Single Port is time consuming as it shows or hides one
port at a time.

Multiple Ports

If Multiple Ports is selected, you can click on multiple ports to show or hide them. This
mode is much faster. Click on multiple ports to show or hide them.
Figure 3.112: SAS: Show/Hide Ports Toolbar
.
Figure 3.113: SATA: Show/Hide Ports Toolbar
You can also show or hide a port by right‐clicking a Port ID in Text View or Column View
and choosing Show or Hide (see
3.9 Packet View Toolbar
The Packet View toolbar allows wrapping, zooming, and configuration.
Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
Figure 3.117 on page 310).
Teledyne LeCroy
305