Frame Inspector View - Teledyne Sierra M6-2 User Manual

Analysis
Double clicking in the Identify Device Frame (while in Text Mode) will pop up the Data
Payload View. See
Figure 3.29: Data Payload View from Identify Device Frame in Text Mode
3.3.8

Frame Inspector View

Frame Inspector View has lots of information that is available in Packet View, but not
Spreadsheet View, so it is most useful in conjunction with the Spreadsheet View.
This view has the following three tabs:
Spec View:
This view shows the Frame as it would appear in the spec, with the field names and values
spelled out clearly. Fields that are too short to clearly contain the description can be
viewed as tooltips by hovering the mouse over them. Some fields might have a a
lowercase 'e' button at the top right corner. Pressing this button displays an 'expanded'
view of the sub‐fields in this field.
Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
Figure 3.29 on page 241.
Teledyne LeCroy
241