Teledyne Sierra M6-2 User Manual page 398

Teledyne LeCroy
is only used for specifying custom DWORDs). Note that choice of a mask and an offset are
still available when using captured DWORDs.
Figure 4.21: Using a Captured DWORD in a SAS Data Pattern
Captured data DWORDs may also be used in the Substitute Data DWORD test state
action. From the Action Properties screen, choose Substitute Data DWORD and then
select the Substitute for property. A drop‐down menu is provided (see below) that allows
the choice of a custom DWORD or any of the four captured DWORD registers.
396 Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
Scenario Actions