Teledyne Sierra M6-2 User Manual page 308

Teledyne LeCroy
306
The Wrap Packets button on the Viewer Toolbar wraps the packet data in the
display to eliminate the need for horizontal scrolling.
Go to CATC Navigation View. Click this button to change the trace display to a
CATC Trace™.
You can change the colors, fonts, and so on, in the Trace Viewer Configuration
(see "Trace Viewer Configuration" on page
The Show/Hide Link Packet button displays/hides the Link layer (SAS only).
The Show/Hide Transport Packet button on the Layers Toolbar displays/hides
the Transport layer and below (SAS only).
The Show/Hide All Commands Packet button shows/hides the
Command layer and all layers below: SCSI Cmd and Task Mng, SMP
Cmd, and ATA Cmd (SAS only).
Click the down arrow on the Show/Hide All Commands Packet
button to choose command types to show/hide.
The Show/Hide Physical Packet button toggles the display of physical layer
packets (SATA only).
The Show/Hide FIS packet button toggles the display of FIS layer packets.
When "OFF", the FIS layer and its links are hidden (SATA only).
The Show/Hide CMD packet button toggles the display of the CMD packets.
When "ON", only the command layer displays (SATA only).
The Show/Hide Command Queue (CQ) button displays queued commands.
SATA only.
The CQ button's hierarchy only applies to ReadDMAQueued and
WriteDMAQueued. The hierarchy for other queued commands is displayed
as part of the regular application layer decoding.
The Order/Reorder toggles the time order of packets. SATA only.
318).
Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
Packet View Toolbar