Triggering On A Timer; Timeout - Teledyne Sierra M6-2 User Manual

Projects
To remove an item, highlight it in the Project Tree, then click the <<Remove button.

Triggering on a Timer

Triggering based on a timer means that the trigger is activated when the timer expires.
Other triggers can preempt the timed trigger while it is counting down the time. The
timer starts when the project s started.
You can set a timer independently of any other trigger selection, to cause an
unconditional trigger after a set time.
To set the timer value, double‐click Timer in the Pattern window to open the Timer dialog.
Figure 2.66: Timer Dialog
Check a Time Unit, enter the Timer Value, and click OK.

Timeout

Selecting Timeout for the pattern opens the Timeout Pattern dialog.
Figure 2.67: Timeout Dialog
Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
Teledyne LeCroy
85