Example 2: Wait For A Primitive And Replace It With An Error - Teledyne Sierra M6-2 User Manual

Creating Global Rules
4.9.2

Example 2: Wait for a Primitive and Replace It with an Error

In this example, the Global Rules portion of the scenario waits for each RRDY Normal
primitive and replaces it with an ERROR primitive.
1. Click the New Scenario button in the main library or one of the device libraries. In
2. In the Global Rules area, click the prompt to add an event to display the
3. As you did in the previous example, choose RRDY (Normal) as the type of primitive
4. In the Global Rules area, click the prompt to add an action to display the
5. In the Type column on the left, choose Substitute > with SAS Primitive as the action
6. In the middle column of the dialog box, click Description if you want to add a
7. Still in the middle column of the Event Properties dialog box, click Primitive to
8. Click OK to close the Action Properties dialog box.
9. In the File menu, select Save Scenario to save the scenario.
Figure 4.31: Example 2: Complete Scenario
Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
the Scenario Properties dialog, enter the scenario name, description, and direction
of traffic change.
Event Properties dialog box.
to monitor.
Action Properties dialog box.
that you want when an RRDY (Normal) occurs.
description of the action.
display a drop‐down menu that lets you choose the type of primitive for which to
substitute for RRDY (Normal) (see
In this example, you set the substitution action to happen at every occurrence of an
RRDY (Normal) (as shown in the figure, the action is set for every occurrence).
However, you can set an action to happen at other multiples of event occurrence
(for example 5, 25, 1000 and so on). You also can set the action to happen at
random, within a specified number of event occurrences.
Figure 4.28 on page 403). Choose ERROR.
Teledyne LeCroy
405