Go To Menu; Locate Cursors - Teledyne Sierra M6-2 User Manual

Navigation + View Toolbar
3.8.1

Go To Menu

Locate Cursors

To quickly locate any cursor within the data viewer display, click the Go To button and
choose the cursor to locate. You can also locate a cursor by selecting Go To from the Edit
menu and choosing the cursor to locate.
Figure 3.90: Locate Cursor
Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
The Hide All Primitives button toggles the display to show/hide all primitives
(see "Filtering" on page
ability to filter the PM primitives so you can find commands quicker.
The Zoom In button on the Viewer Setting Toolbar magnifies the data display
area on the screen. Clicking this button in Column or Text View increases
column width only.
The Zoom Out button on the Viewer Setting Toolbar scales the data display
area to display more data lines on the screen. Clicking this button in Column
or Text View decreases column width only.
The Normal Zoom button on the Viewer Setting Toolbar resets the zoom to
default normal on the screen. Clicking this button in Column or Text View
resets column width only.
You can use Tile Horizontally All Views icon or select View > Tile Views to
revert any unintended window docking or sizing, or maximize screen
utilization. This function only tiles views inside a trace window.
Note that there is no command to tile views vertically.
287. Note: When capturing PM traces, you need the
You can use this tool to incrementally Show or Hide
Ports, either one at a time, or multiple ports at the
same time. For multiple ports, select the desired ports
to Show or Hide, and click Apply (see
Ports" on page 305).
Teledyne LeCroy
"Show/Hide
283