Generating A Jammer Marker - Teledyne Sierra M6-2 User Manual

Teledyne LeCroy
Figure 4.23: Internal Trigger Index
4.8.3

Generating a Jammer Marker

The main purpose of this feature to enable the user to mark specific parts of the captured
traffic for easier tracking of data.
In Sequence 0 shown below, the Event is Waiting for a CRC Error. After that event occurs
an Action will be taken, (see
398
Figure 4.24 on page 399).
Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
Scenario Actions