Generating Traffic - Teledyne Sierra M6-2 User Manual

Teledyne LeCroy
For any available Link, you can select any open script from the Script drop‐down list.
After you select an open script, you can assign or remove a link for that script by clicking
Assign Active Script/Remove Assigned Script for Link.
5.11

Generating Traffic

After the .ssg file has been opened onscreen, recording and traffic generation can begin
at any time.
1. (optional) Click
2. If the script does not have a connect block built into it, connect the exerciser to the
3. Click the Start Generation button
456
DUT by clicking the Connect Link button
generator to invoke the various settings in your script (for example, the global
settings) and then establish a connection.
to begin the recording.
. Clicking this button causes the
on the Toolbar.
Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
Generating Traffic