Teledyne Sierra M6-2 User Manual page 178

Teledyne LeCroy
Figure 2.190: Set Counter as Data
Random Data Pattern
To use a random data pattern, click the Random button, enter the number of times to
repeat the pattern, and click OK.
Figure 2.191: Choose a Random Pattern
Walking Bit Pattern
To use a walking bit pattern, click the Walking Bit button, then choose either a walking bit
of "0" or "1", the walk direction, the start position, and the number of times to repeat the
pattern (see
176
Figure 2.192 on page 177).
Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
Emulation