Outgoing Scsi Frame Settings - Teledyne Sierra M6-2 User Manual

Emulation
Incoming Open Primitive Response
To set a response to an incoming Open frame, check Incoming Open Frame Response,
select a Primitive, and enter a value for Delay.
Figure 2.166: SAS: Open Primitive Response
Enable First Burst
Check the Enable First Burst box to specify to transfer the first burst data as defined by
the First Burst Size field in the Advanced Initiator Setting dialog (see
page
Task Attribute
Choose a task attribute of Simple, Head of Queue, Ordered, or ACA by checking the
corresponding option button.
Set Hard Reset
Check the radio button and enter the delay after command restarts to send the Hard
Reset.
LBA Overlay - Overwrites first Dword of:
Check the LBA Overlay ‐ Overwrites first Dword of check box. Select one of the two
options:

Outgoing SCSI Frame Settings

Before selecting Outgoing Frame Settings, select the Types Of Frames and the
Frame Number on which to inject an error. Then check Outgoing Frame in the Generate
Error On area and then the Settings button to display the Outgoing Frame Setting dialog
(see
Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
164).
Each sector with: Overwrites first Dword of each sector with given value

First sector with: Overwrites first Dword of first sector with given value band

increments for next sector(s)
Figure 2.167 on page 158).
Teledyne LeCroy
Figure 2.174 on
157