Teledyne Sierra M6-2 User Manual page 153

Emulation Teledyne LeCroy
area and then the enabled Settings button to display the Outgoing Frame Settings dialog
(see Figure 2.160 on page 151).
Figure 2.160: Outgoing Frame Settings
Frame Type Error
Check this to introduce a frame type error.
Remove Frame from sequence
Check this to remove frame from sequence.
Delay in sending frame
Check this to delay sending frame and enter a value for the delay.
Frame Length Error
Check Frame Length Error and choose the type of error to introduce.
Code violation and Disparity error
Check these and specify DWORD offset and number of error DWORDs.
Additionally check:
No WTRM
Code Violation on SATA primitive
Disparity error on SATA primitive
Ignore XRDY/RRDY sequence
Delay in HOLD response (in sending HOLDA)
SOF, EOF and CRC errors
Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual 151